- -20%
CRX 75/90NT 1L Millers Gear Oil
Reference: CRX75/90NT
CRX 75w90 NT+ is ideal for modern transmissions, differentials, and limited slip differentials (excluding plated type LSD)
Classic Running In Oil 30 is a SAE 30 mineral based running in oil for vintage and classic engines. This product is designed for the initial running in of re-built engines. Use of this product optimizes performance and fuel efficiency.
Classic Running In Oil 30 is a SAE 30 mineral based running in oil for vintage and classic engines. This product is designed for the initial running in of re-built engines. Use of this product optimizes performance and fuel efficiency.
Use as received for initial running in of re-built engines. Formulated for running in on the road. Can be used for test bed running. Run engine at peak torque to ensure maximum bedding-in of piston rings. Drain and refill with the Millers Classic lubricant most suitable for the engine. Note: Do not use high performance oils before the bedding-in process is complete.
• High quality mineral oil formulated to solve the problems experienced when reconditioned engines do not bed-in.
• Provides full protection to highly stressed valve gear/associated components whilst allowing piston rings to bed in against the bore.
• Suitable for 500 miles after which it should be replaced with the appropriate Millers Oils classic engine oil.
• Good running in will optimise the performance and fuel efficiency of a reconditioned engine.
Reference: CRX75/90NT
CRX 75w90 NT+ is ideal for modern transmissions, differentials, and limited slip differentials (excluding plated type LSD)
Reference: RAV-30-RUN-IN-5L
RAVENOL Running-In / Break-In oil is a non friction modified, low detergent & dispersant SAE30 engine oil, designed for the critical running in period for both new and re-built 4-stroke engines.
Reference: CFS10/40
CFS 10w40 is part of the Competition Fully Synthetic ranges of engine oils, incorporating Millers Oils original NANODRIVE low friction technology, increasing power and torque for a competitive edge in non-professional racing.
Reference: CFS10/60
CFS 10w60 is part of the Competition Fully Synthetic ranges of engine oils, incorporating Millers Oils original NANODRIVE low friction technology, increasing power and torque for a competitive edge in non-professional racing.
We accept payment from
We are a UK company that ships globally including to the EU, America and Asia.